Super Boosted - Revision history

Ruh at 19:39, 7 July 2024

2024-07-07T19:39:59Z

← Older revision		Revision as of 19:39, 7 July 2024
Line 14:		Line 14:

	Note that this is also why ice boosteds, or super boosteds, work. The friction value for <code>ice-surface</code> is even lower. However, if you fall off an edge of ice, you'll get switched back to <code>edge-surface</code> and get a normal boosted uppercut instead.		Note that this is also why ice boosteds, or super boosteds, work. The friction value for <code>ice-surface</code> is even lower. However, if you fall off an edge of ice, you'll get switched back to <code>edge-surface</code> and get a normal boosted uppercut instead.

			=== ice-surface Values ===
			<nowiki>
			(let ((v1-43 (new 'static 'surface
			:name 'ice-surface
			:turnv 0.5
			:turnvv 1.0
			:tiltv 1.0
			:tiltvv 1.0
			:transv-max 1.5
			:target-speed 1.5
			:seek0 24576.0
			:seek90 24576.0
			:seek180 24576.0
			:fric 23756.8
			:nonlin-fric-dist 4091904.0
			:slip-factor 0.7
			:slope-slip-angle 16384.0
			:bend-speed 4.0
			:alignv 1.0
			:slope-up-traction 1.0
			:align-speed 1.0
			:turnvf 1.0
			:turnvvf 1.0
			:tiltvf 1.0
			:tiltvvf 1.0
			:vel-turn 1.0
			:flags (surface-flag no-turn-around turn-to-pad)
			)
			)
			)
			(set! ice-surface v1-43)
			(set! (-> v1-43 exit-hook) nothing)
			(set! (-> v1-43 mult-hook) (the-as (function surface surface surface int none) nothing))
			(set! (-> v1-43 touch-hook) nothing)
			(set! (-> v1-43 active-hook) nothing)
			)</nowiki>

	== Discovery ==		== Discovery ==

Ruh: /* Technical */

2024-07-07T19:33:44Z

Technical

← Older revision		Revision as of 19:33, 7 July 2024
Line 9:		Line 9:

	== Technical ==		== Technical ==
			''Explanation taken from the Boosted Uppercut page.''

			When Jak walks off a ledge, he enters a collision mode called <code>low-coverage</code>. When in this mode, Jak's surface is changed to <code>[https://github.com/open-goal/jak-project/blob/b4113dda6719bdeca4b49c8f85f817aaa4329da2/goal_src/jak2/engine/target/surface-h.gc#L972C1-L1005 edge-surface]</code> which has lower than normal friction. Performing a punch uppercut while in this low friction mode results in a lot more momentum than normal friction.

			Note that this is also why ice boosteds, or super boosteds, work. The friction value for <code>ice-surface</code> is even lower. However, if you fall off an edge of ice, you'll get switched back to <code>edge-surface</code> and get a normal boosted uppercut instead.

	== Discovery ==		== Discovery ==

Ruh: /* Tutorial */

2024-07-07T19:32:27Z

Tutorial

← Older revision		Revision as of 19:32, 7 July 2024
Line 6:		Line 6:

	== Tutorial ==		== Tutorial ==
			In order to get a super boosted, Jak needs to begin a punch from a normal surface and end the punch on the ice surface. The uppercut needs to be performed while on an ice surface.

	== Technical ==		== Technical ==

Ruh at 19:29, 7 July 2024

2024-07-07T19:29:29Z

← Older revision		Revision as of 19:29, 7 July 2024
Line 4:		Line 4:
	[[File:Misty-island-ice-surfaces.jpg\|thumb\|right\|Misty Island surfaces that were mistakenly given the <code>ice-surface</code> property.]]		[[File:Misty-island-ice-surfaces.jpg\|thumb\|right\|Misty Island surfaces that were mistakenly given the <code>ice-surface</code> property.]]
	The movement technique was originally called "Super Boosted" because it was theorized that 2 or more boosted uppercuts were executing at the same time. Eventually, it was discovered that the surfaces where it could be performed mistakenly had <code>ice-surface</code> properties assigned to it.		The movement technique was originally called "Super Boosted" because it was theorized that 2 or more boosted uppercuts were executing at the same time. Eventually, it was discovered that the surfaces where it could be performed mistakenly had <code>ice-surface</code> properties assigned to it.

			== Tutorial ==

			== Technical ==

			== Discovery ==


			{{Movement_Techniques}}

Ruh at 19:26, 7 July 2024

2024-07-07T19:26:03Z

← Older revision		Revision as of 19:26, 7 July 2024
Line 1:		Line 1:
	[[File:Super Boosted.gif\|frame\|right\|A Super Boosted being performed on the Misty Island <code>ice-surface</code>.		[[File:Super Boosted.gif\|frame\|right\|A Super Boosted being performed on the Misty Island <code>ice-surface</code>.]]
	A '''super boosted''', or an '''ice boosted''', is when Jak performs a [[Boosted Uppercut\|boosted uppercut]] while Jak's surface is set to <code>[https://github.com/open-goal/jak-project/blob/b4113dda6719bdeca4b49c8f85f817aaa4329da2/goal_src/jak2/engine/target/surface-h.gc#L1118 ice-surface]</code>.		A '''super boosted''', or an '''ice boosted''', is when Jak performs a [[Boosted Uppercut\|boosted uppercut]] while Jak's surface is set to <code>[https://github.com/open-goal/jak-project/blob/b4113dda6719bdeca4b49c8f85f817aaa4329da2/goal_src/jak2/engine/target/surface-h.gc#L1118 ice-surface]</code>.

	[[File:Misty-island-ice-surfaces.jpg\|thumb\|right\|Misty Island surfaces that were mistakenly given the <code>ice-surface</code> property.]]		[[File:Misty-island-ice-surfaces.jpg\|thumb\|right\|Misty Island surfaces that were mistakenly given the <code>ice-surface</code> property.]]
	The movement technique was originally called "Super Boosted" because it was theorized that 2 or more boosted uppercuts were executing at the same time. Eventually, it was discovered that the surfaces where it could be performed mistakenly had <code>ice-surface</code> properties assigned to it.		The movement technique was originally called "Super Boosted" because it was theorized that 2 or more boosted uppercuts were executing at the same time. Eventually, it was discovered that the surfaces where it could be performed mistakenly had <code>ice-surface</code> properties assigned to it.

Ruh at 19:25, 7 July 2024

2024-07-07T19:25:56Z

← Older revision		Revision as of 19:25, 7 July 2024
Line 1:		Line 1:
			[[File:Super Boosted.gif\|frame\|right\|A Super Boosted being performed on the Misty Island <code>ice-surface</code>.
	A '''super boosted''', or an '''ice boosted''', is when Jak performs a [[Boosted Uppercut\|boosted uppercut]] while Jak's surface is set to <code>[https://github.com/open-goal/jak-project/blob/b4113dda6719bdeca4b49c8f85f817aaa4329da2/goal_src/jak2/engine/target/surface-h.gc#L1118 ice-surface]</code>.		A '''super boosted''', or an '''ice boosted''', is when Jak performs a [[Boosted Uppercut\|boosted uppercut]] while Jak's surface is set to <code>[https://github.com/open-goal/jak-project/blob/b4113dda6719bdeca4b49c8f85f817aaa4329da2/goal_src/jak2/engine/target/surface-h.gc#L1118 ice-surface]</code>.

	[[File:Misty-island-ice-surfaces.jpg\|thumb\|right\|Misty Island surfaces that were mistakenly given the <code>ice-surface</code> property.]]		[[File:Misty-island-ice-surfaces.jpg\|thumb\|right\|Misty Island surfaces that were mistakenly given the <code>ice-surface</code> property.]]
	The movement technique was originally called "Super Boosted" because it was theorized that 2 or more boosted uppercuts were executing at the same time. Eventually, it was discovered that the surfaces where it could be performed mistakenly had <code>ice-surface</code> properties assigned to it.		The movement technique was originally called "Super Boosted" because it was theorized that 2 or more boosted uppercuts were executing at the same time. Eventually, it was discovered that the surfaces where it could be performed mistakenly had <code>ice-surface</code> properties assigned to it.

Ruh at 19:17, 7 July 2024

2024-07-07T19:17:02Z

← Older revision		Revision as of 19:17, 7 July 2024
Line 1:		Line 1:
	A '''super boosted''', or an '''ice boosted''', is when Jak performs a [[Boosted Uppercut\|boosted uppercut]] while Jak's surface is set to <code>[https://github.com/open-goal/jak-project/blob/b4113dda6719bdeca4b49c8f85f817aaa4329da2/goal_src/jak2/engine/target/surface-h.gc#L1118 ice-surface]</code>.		A '''super boosted''', or an '''ice boosted''', is when Jak performs a [[Boosted Uppercut\|boosted uppercut]] while Jak's surface is set to <code>[https://github.com/open-goal/jak-project/blob/b4113dda6719bdeca4b49c8f85f817aaa4329da2/goal_src/jak2/engine/target/surface-h.gc#L1118 ice-surface]</code>.

			[[File:Misty-island-ice-surfaces.jpg\|thumb\|right\|Misty Island surfaces that were mistakenly given the <code>ice-surface</code> property.]]
	The movement technique was originally called "Super Boosted" because it was theorized that 2 or more boosted uppercuts were executing at the same time. Eventually, it was discovered that the surfaces where it could be performed mistakenly had <code>ice-surface</code> properties assigned to it.		The movement technique was originally called "Super Boosted" because it was theorized that 2 or more boosted uppercuts were executing at the same time. Eventually, it was discovered that the surfaces where it could be performed mistakenly had <code>ice-surface</code> properties assigned to it.

Ruh at 19:11, 7 July 2024

2024-07-07T19:11:48Z

← Older revision		Revision as of 19:11, 7 July 2024
Line 1:		Line 1:
	A '''super boosted''', or an '''ice boosted''', is when Jak performs a [[Boosted Uppercut\|boosted uppercut]] while Jak's surface is set to <code>ice-surface</code>.		A '''super boosted''', or an '''ice boosted''', is when Jak performs a [[Boosted Uppercut\|boosted uppercut]] while Jak's surface is set to <code>[https://github.com/open-goal/jak-project/blob/b4113dda6719bdeca4b49c8f85f817aaa4329da2/goal_src/jak2/engine/target/surface-h.gc#L1118 ice-surface]</code>.

			The movement technique was originally called "Super Boosted" because it was theorized that 2 or more boosted uppercuts were executing at the same time. Eventually, it was discovered that the surfaces where it could be performed mistakenly had <code>ice-surface</code> properties assigned to it.

Ruh: Created page with "A '''super boosted''', or an '''ice boosted''', is when Jak performs a boosted uppercut while Jak's surface is set to `ice-surface`."

2024-07-07T18:51:50Z

Created page with "A '''super boosted''', or an '''ice boosted''', is when Jak performs a boosted uppercut while Jak's surface is set to <code>*ice-surface*</code>."

New page

A '''super boosted''', or an '''ice boosted''', is when Jak performs a [[Boosted Uppercut|boosted uppercut]] while Jak's surface is set to <code>*ice-surface*</code>.

← Older revision		Revision as of 19:26, 7 July 2024
Line 1:		Line 1:
	[[File:Super Boosted.gif\|frame\|right\|A Super Boosted being performed on the Misty Island <code>ice-surface</code>.		[[File:Super Boosted.gif\|frame\|right\|A Super Boosted being performed on the Misty Island <code>ice-surface</code>.]]
	A '''super boosted''', or an '''ice boosted''', is when Jak performs a [[Boosted Uppercut\|boosted uppercut]] while Jak's surface is set to <code>[https://github.com/open-goal/jak-project/blob/b4113dda6719bdeca4b49c8f85f817aaa4329da2/goal_src/jak2/engine/target/surface-h.gc#L1118 ice-surface]</code>.		A '''super boosted''', or an '''ice boosted''', is when Jak performs a [[Boosted Uppercut\|boosted uppercut]] while Jak's surface is set to <code>[https://github.com/open-goal/jak-project/blob/b4113dda6719bdeca4b49c8f85f817aaa4329da2/goal_src/jak2/engine/target/surface-h.gc#L1118 ice-surface]</code>.

	[[File:Misty-island-ice-surfaces.jpg\|thumb\|right\|Misty Island surfaces that were mistakenly given the <code>ice-surface</code> property.]]		[[File:Misty-island-ice-surfaces.jpg\|thumb\|right\|Misty Island surfaces that were mistakenly given the <code>ice-surface</code> property.]]
	The movement technique was originally called "Super Boosted" because it was theorized that 2 or more boosted uppercuts were executing at the same time. Eventually, it was discovered that the surfaces where it could be performed mistakenly had <code>ice-surface</code> properties assigned to it.		The movement technique was originally called "Super Boosted" because it was theorized that 2 or more boosted uppercuts were executing at the same time. Eventually, it was discovered that the surfaces where it could be performed mistakenly had <code>ice-surface</code> properties assigned to it.

← Older revision		Revision as of 19:25, 7 July 2024
Line 1:		Line 1:
			[[File:Super Boosted.gif\|frame\|right\|A Super Boosted being performed on the Misty Island <code>ice-surface</code>.
	A '''super boosted''', or an '''ice boosted''', is when Jak performs a [[Boosted Uppercut\|boosted uppercut]] while Jak's surface is set to <code>[https://github.com/open-goal/jak-project/blob/b4113dda6719bdeca4b49c8f85f817aaa4329da2/goal_src/jak2/engine/target/surface-h.gc#L1118 ice-surface]</code>.		A '''super boosted''', or an '''ice boosted''', is when Jak performs a [[Boosted Uppercut\|boosted uppercut]] while Jak's surface is set to <code>[https://github.com/open-goal/jak-project/blob/b4113dda6719bdeca4b49c8f85f817aaa4329da2/goal_src/jak2/engine/target/surface-h.gc#L1118 ice-surface]</code>.

	[[File:Misty-island-ice-surfaces.jpg\|thumb\|right\|Misty Island surfaces that were mistakenly given the <code>ice-surface</code> property.]]		[[File:Misty-island-ice-surfaces.jpg\|thumb\|right\|Misty Island surfaces that were mistakenly given the <code>ice-surface</code> property.]]
	The movement technique was originally called "Super Boosted" because it was theorized that 2 or more boosted uppercuts were executing at the same time. Eventually, it was discovered that the surfaces where it could be performed mistakenly had <code>ice-surface</code> properties assigned to it.		The movement technique was originally called "Super Boosted" because it was theorized that 2 or more boosted uppercuts were executing at the same time. Eventually, it was discovered that the surfaces where it could be performed mistakenly had <code>ice-surface</code> properties assigned to it.

← Older revision		Revision as of 19:17, 7 July 2024
Line 1:		Line 1:
	A '''super boosted''', or an '''ice boosted''', is when Jak performs a [[Boosted Uppercut\|boosted uppercut]] while Jak's surface is set to <code>[https://github.com/open-goal/jak-project/blob/b4113dda6719bdeca4b49c8f85f817aaa4329da2/goal_src/jak2/engine/target/surface-h.gc#L1118 ice-surface]</code>.		A '''super boosted''', or an '''ice boosted''', is when Jak performs a [[Boosted Uppercut\|boosted uppercut]] while Jak's surface is set to <code>[https://github.com/open-goal/jak-project/blob/b4113dda6719bdeca4b49c8f85f817aaa4329da2/goal_src/jak2/engine/target/surface-h.gc#L1118 ice-surface]</code>.

			[[File:Misty-island-ice-surfaces.jpg\|thumb\|right\|Misty Island surfaces that were mistakenly given the <code>ice-surface</code> property.]]
	The movement technique was originally called "Super Boosted" because it was theorized that 2 or more boosted uppercuts were executing at the same time. Eventually, it was discovered that the surfaces where it could be performed mistakenly had <code>ice-surface</code> properties assigned to it.		The movement technique was originally called "Super Boosted" because it was theorized that 2 or more boosted uppercuts were executing at the same time. Eventually, it was discovered that the surfaces where it could be performed mistakenly had <code>ice-surface</code> properties assigned to it.